Turning a miter gauge into a bandsaw resaw fence is a great idea. But only if you know how to set the fence up for drift compensation. It’s a simple process, but has to be done correctly or your resaw work won’t come out right. A simple test cut is all that’s required to establish the drift angle for the fence.
Check out this related video:
Miter Gauge Bandsaw Fence
George Vondriska demonstrates a unique way to color wood using a simple iron acetate solution that creates a chemical reaction with the natural tannins in wood. If you are using a wood species with a low level of tannin, George shows you the process for adding tannins so that the iron acetate will have a…
Watch Now >>
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >>
Did you know that your woodworking router can actually hold and use 8mm shanked router bits? Not 1/4″, not 1/2″, but 8 mm. Master woodworker George Vondriska discusses the calculated method to the madness, and introduces a must-have tool that will allow 8 mm shanked router bits to work in your router. Learn all about…
Watch Now >>
When working on your woodworking project, have you ever wondered why most dovetail jigs are a two-bit operation? Woodworking expert George Vondriska explains how through-pins and tails are cut on a jig, and when to use each of the two cutters required for the process. He also discusses why it’s so important to match the…
Watch Now >>
Unlock exclusive member content from our industry experts.
Unlock exclusive member content from our industry experts.
Get everything included in Premium plus exclusive Gold Membership benefits.